Garden Treasures 850SDF Manual Del Usuario página 6

ASSEMBLY INSTRUCTIONS
7. Sit chair upright and insert hex head screws
(BB) into pre-drilled holes in chair back (A),
chair seat (B), back spindle (C) and front
spindles (D). Begin turning hex head screws
(BB) by hand clockwise, then tighten fully with
hex wrench (CC).
Note: You may have to hold back spindle (C)
and front spindles (D) to keep them from turning
while you tighten hex head screws (BB).
Hardware Used
BB
Hex Head Screw
CC
Hex Wrench
8. Insert buttons (AA) into pre-drilled holes to cover
hex head screws (BB).
Note: Use a rubber mallet to secure parts in
place.
Hardware Used
AA
Button
9. Place chair assembly back on its side. With the
pre-drilled holes on either right runner (G) or
left runner (H) – depending on how the chair is
laying – facing inside, attach it to the chair front
first and then to the back of the chair. Repeat on
the other side.
Note: Use a rubber mallet to secure parts in
place.
Note: You might need to tap on the chair
assembly in order to align the holes enough for
the runners to be assembled securely.
7
x 12
x 1
8
x 12
9
Lowes.com/gardentreasures
6
BB
AA
H
BB
CC