Hands-Free Mode - HEADRUSH MX5 Guia De Inicio Rapido

Hands-Free Mode

Hands-Free Mode enables you to adjust any of the
settings on your models by using just the
footswitches and expression pedal.
To enter Hands-Free Mode, press and hold
footswitch 1 to enter the mode select page, and
then press and hold footswitch 1 again.
To increase or decrease the value shown, move
the expression pedal.
To decrease the
increments, press footswitch 1 and 2 ()
simultaneously.
To increase the
increments, press footswitch 2 and 3 ()
simultaneously.
To edit the next model in your rig, press
footswitch 1.
To edit the previous model in your rig, hold
footswitch 1.
To show the next parameter for the shown
model, press footswitch 2.
To show the previous parameter for the shown
model, hold footswitch 2.
To exit Hands-Free Mode, press footswitch 3.
Tuner/Tempo
You can use the Tuner/Tempo page to tune your
guitar and set a tempo for time-based effects.
To enter Tuner/Tempo mode, press and hold
footswitch 3 for over one second. While in
Tuner/Tempo Mode, the screen to the right is
shown.
To change the tuner reference pitch, tap the
parameter and then turn the encoder.
To unmute your signal while tuning, press
footswitch 1.
To enter a tempo via tapping a footswitch,
press footswitch 2 at the desired tempo 3–8
times to set the tempo in beats per minute
(BPM).
To exit this page, press footswitch 3.
Tip: You can also assign Tap Tempo to a footswitch within a rig on the Hardware Assign page.
value shown in
value shown in
small
small
15