Utilitech 148007 Manual De Instrucciones página 6

2. Attach discharge hose (not provided) to pump
(A) outlet. A standard 3/4 in. garden hose may
be used as a discharge line.
CAUTION: Keep the total length as short as
possible for best performance.
PRIMING AND STARTUP
PUMP MUST BE PRIMED BEFORE USING!
1. Remove priming plug from the top of pump (A).
2. Fill pump (A) housing with clean water. Reinstall plug.
DO NOT RUN DRY.
NOTE: Do not pump sand or other abrasives as this
will damage the shaft seal or impeller and void the
warranty.
2
Out
1
Priming Plug
2
6
In
A
A
A