Oxygenics Genius BodySpa Instrucciones De Instalación

B S
ody
eaSy iNSTallaTiON
iNSTrucTiONS
STeP 1 STeP 2
Remove your Remove any
existing shower remnants of old
head. To remove, plumber's tape
turn the existing and flush out
shower head in a shower pipe for
counterclockwise 5 to 10 seconds.
direction.
STeP 4 STeP 5
In a clockwise Attach wide end
direction, screw of the Comfort
handheld holder Control Valve to
onto the taped base of handheld
portion of shower shower and turn
arm. Hand tighten counterclockwise.
only. Hand tighten only.
aTTeNTiON:
SmOOTH eNd Of HOSe aTTacHeS
TO SHOwer Head
uSiNG THe cOmfOrT cONTrOl
To change the shower spray, rotate (left or right) the
ribbed portion of the comfort control regulator to the
desired flow. Be careful not to unscrew the regulator from
handheld shower.
Note: The comfort control regulator is not a shut off valve.
When turned to the lowest position, the shower head
continues to flow. This is a normal safety feature.
pa
with comfort control
STeP 3
Wrap plumber's
tape clockwise 3
or 4 turns around
threaded end of
shower arm.
STeP 6
Attach grooved end of
hose to holder, turning
counterclockwise.
Attach smooth end
of hose to Comfort
Control Valve, turning
counterclockwise.
Hand tighten only.
STOP!
Need HelP?
PleaSe dO NOT reTurN THiS
PrOducT TO THe STOre.
If you need installation assistance, replacement
parts or have questions regarding our warranty
please contact customer service at
1.866.440.9257
1.775.420.5600
or
Support is also available via email at
support@oxygenics.com
Be sure to visit our website at
www.oxygenics.com
Business Hours: Monday-Friday
7:00 am to 4:30pm PST