RHINO COFFEE GEAR RCGDOSE1000 Manual Del Usuario página 2

ON/OFF FUNCTION
Place your scale on a flat and stable surface away from any electronic equipment
that may interfere with the scale. Press and release the button, wait until
ON/OFF
the display shows "0.0" and the zero-stable sign " ", you may now place the
object you want to weigh on the platform. The scale can be read when the lock
sign " " is shown in the display.
TARE FUNCTION
Turn on the scale as described above, place the "tare item" on the platform,
press the "TARE" button to zero out the display, when "0.0" appears on the
screen you may now place items on the scale to be weighed. Once you are
finished weighing, remove all objects from the scale, press the "TARE" again to
cancel the TARE FUNCTION.
RETURN TO ZERO
After weighing an item, if the display does not read "0.0" press the TARE button
to return to "0.0" and you are ready to weigh again.
CHANGE WEIGHING MODES
Press the "MODE" button to change weighing modes on your scale. This scale
has 4 weighing modes: g, oz, gn, dwt.
CALIBRATION
With the scale turned on and placed on a stable surface, press the
CALIBRATION button and "500.0" will flash in the display, immediately place a
total of 500g weight on the scale. The scale will reset itself and will give you a
PASS message. Calibration is complete.
OPERATING ENVIRONMENT
The optimum operating temperature for the scale is 50-86° F/10-30°C. Rough
handling of the scale will damage the internal sensor; so you must avoid actions
such as shaking or dropping the scale. This is a sensitive piece of electronic
equipment and will be affected by things such as moisture, extreme temperature
changes, magnetic fields, careless handling and misuse.
AUTOMATIC SHUT-OFF
The scale will automatically shut-off after 180 seconds of inactivity this is to help
conserve the battery power. We recommend good quality AAA batteries.