Care And Maintenance - EDM Product Koma Tools 08723 Manual De Instrucciones

MOUNTING
ES
BEFORE THE FIRST USE, FULLY CHARGE THE BATTERY
▶Connect the plug of the charger's power supply to the charging
socket (8) on the cordless screwdriver.
PT
▶Plug the charger into a conventional 230V- / 50Hz household outlet.
▶Let the battery charge for approx. 3.5 to 4 hours.
▶Take into account the max. charge so as not to damage or destroy
the battery.
EN
▶After the charging process, separate the power supply unit from the
power supply and from the cordless screwdriver.
BATTERY CHARGE STATUS INDICATION (6)
FR
Pressing the button (9) indicates the battery charge status by means of
three LEDs of different colors:
▶Red LED on
▶Red + yellow LEDs on
▶all three LEDs on
When the only red LED is lit, the battery needs to be recharged.
TOOL PLACEMENT
▶Press the outer ring of the chuck (1) towards the machine and insert
the magnetic holder into the drill holder until it stops. The bracket is
locked by releasing the outer ring.
▶Insert the required tip into the holder.
▶Bits with a length of 50 mm can also be inserted directly into the
holder of the cordless screwdriver.
LEFT / RIGHT ROTATION
▶When changing the direction of rotation you must stop the machine
and place the switch (4) in the desired position.
▶Do not change the direction of rotation when the machine is running.
▶Before starting work, check if the switch (4) is in the desired
position and if the bit holder (1) rotates in the correct direction,
otherwise the tool or cordless screwdriver may be damaged.
damaged.
TORQUE SETTING
▶The cordless drill is equipped with a torque setting.
▶By turning the ring (2), the torque can be modified to achieve
different depths for drilling the screws. If the set number is high, the
higher the torque will be.
▶To drill, place the ring (2) on the drill symbol, in this way the highest
torque is achieved.
FUNCTIONING
By pressing the operating switch (9) the cordless screwdriver is
switched on corresponding to the selected direction of rotation.
Instruction manual
< 1,2V
1,2-2,4V
2,4-3,6 V
▶As soon as you release the switch (9), the appliance is switched off.
GUN SHAPE
▶Depending on the areas of application, the cordless screwdriver can
be changed from the pistol position to a straight position.
▶To do this, move the locking button (3) forward and turn the handle
(5) at the same time.
▶In the final position, the locking button (3) is snapped back into
place.
FLASHLIGHT
▶The flashlight (7) is turned on by pressing the LED cover.
▶To turn off, press the lid again.

CARE AND MAINTENANCE

The cordless screwdriver is maintenance-free. Clean the case from time
to time with a dry cloth. Do not use detergents, as these can damage
the case.
ref. 08723