Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTIONS FOR USE
REMOVING / INSERTING SILENTBLOCKS OF PANDA (4X4, CROSS, NATURAL GAS)
5
8
Insert tool 7 + 8 between silentblocks to remove: (photo) position washer 5, and use bush with bearing 9 to
remove right-hand silentblock; REVERSE POSITION to remove left-hand silentblock. Use 19 mm and 30 mm
wrenches (grease screw 8 before use) .
1
3
4
Fit silentblock onto screw and place it with head on washer with bearing 1; get screw onto other side of support
and position milled washer 5; screw nut M12, checking that everything is aligned before screwing. Oil silentblock
(and, before, seat) and use two 30 mm wrenches to rotate nuts. Keep screwing until silentblock is fully inserted.
9
7
5
3
REMOVAL
INSERTION
EN
7
Publicidad
