Sensor Setup; Setting The Alarm; Stop Alarm / Snooze; Setting The Alerts - Philex i-Star 90084PI Manual Del Usuario

Sensor Setup

Place the sensor close to the main unit and insert 2x AA batteries (see page 3).
Use the slide switch on the sensor
button 25
CHANNEL
display 9 . The red LED on the sensor will flash. The weather station will
automatically receive the sensor signal once powered and after a short time a
temperature 8 and humidity
You can now position the sensor outdoors or elsewhere indoors.
If the sensor readings don't appear, press and hold the
least 2 seconds to manually restart the RF connection.
If the sensor signal is lost after 2 hours, "--.-" will be displayed in the
corresponding CH. In normal operation the sensor LED will flash twice
approximately every 2~2.5 minutes.
The weather station can support a total of 3 remote sensors which can be posi-
tioned out doors or around the home.

Setting the Alarm

You can set the alarm for all days of the week (MO-SU) or for weekdays only (MO-FR)
HOUr
ALARM
/
>2s
Once an alarm time has been set, short press the
or off when the alarm is on the alarm icon

Stop Alarm / Snooze

When the alarm is Beeping press the SNOOZE Button
22 to stop the alarm for 5 minutes and the
will be displayed. Press any other button to cancel the alarm sound.

Setting the Alerts

You can set an Alert to warn you when the selected sensor registers a particular
high or low set temperature. (Max. High +70ºC (+158ºF), Min. Low - 40ºC (-40ºF)).
You can set different high and low tempertures for each sensor selected.
MAX TEMP
ALERT
/
>2s
Press the button
ALERT
When the alert high or low temperature set is reached the Alert will Beep for 60
seconds and the ALERT icon
6
H
on the main unit to select the same Channel number on the
11 reading will appear automatically on the display.
MINUTE
/ ALARM
MIN TEMP
/ ALERT
to switch alerts On / Off
26
will flash.
WEATHER STATION - User Guide
to set a channel number 1, 2 or 3. Use the
MO-SU
/ ALARM
/
ALARM
8 will be displayed.
icon
/ ALERT
/
The ALERT icon
below the Channel icons
when alerts are switched on
button 25
CHANNEL
Confirm
MO-FR
ALARM
/
and exit
button 24 to switch it on
appears
www.philex.com
for at