Assembly Instruction - THERMEx Trio Manual De Usuario

1. Assembly Instruction

Please read these instructions carefully before using your new electric halogen patio heater.
Unpack the electric halogen patio heater making sure that all the items are present and that there are no
components left in the box and that the heater head is free from any packing material.
Using the detailed drawing follow the three steps to assemble your halogen heater.
Do not connect the halogen heater to the electrical supply until all the assembly is complete.
Do not connect the halogen heater to the electrical supply if any of the components or the power cord is
damaged in any way.
If in doubt contact your supplier.
Step one: Unpack the electric halogen patio heater making sure that all the items are present.
Step two:
Sæt varmerens monteringsdel A på en stang med en diameter mellem 25 mm - 48 mm.
Step Three: Slip the Mounting Part B and fit it to the Mounting Part A from the bottom up.
Step Four: Turn the Fixation Screw until the Mounting Part A is fixed on the pole.
Pole size between 25mm – 48mm
Mounting Part A Mounting Part B
Fixation Screw
English
9