Publicidad
Idiomas disponibles
Idiomas disponibles
How to mount the spray lance
A
B
A
How to mount the nozzle
The ultra-fine nebulization nozzle can be used, according to how it is assembled, with two
different configurations: single or double nozzle.
1.
Single nozzle: To exclude the lower nozzle from spraying, insert the fiberglass rod into the
nozzle for 58 mm. (See image 1)
2.
Double nozzle: To spray with both nozzles, insert the fiberglass rod into the nozzle just for
15 mm. (See image 2)
58 mm
48
Art. 403
Nebla Electric backpack sprayer 15 L Li-Ion FPM
Assembly and use
B
C
15 mm
1
Art. 403
Nebla Electric backpack sprayer 15 L Li-Ion FPM
Assembly and use
Control of switch handle
The sprayer is equipped with an overload protection unit, which will enable the hydraulic pump
to release pressure automatically when the switch is closed or the nozzle is blocked during
normal spraying operation.
1.
Spray jet interrupted
2.
Keep the lever pressed for continuous spray.
3.
Push the sliding button down and then forward until it clicks-in. Subsequently, the spray will
C
continue without pressing the handle.
Cleaning and maintenance
After every spraying operation, the sprayer shall be cleaned to avoid corrosion of tool and
blocking of sprinkler caused by the liquids. The cleaning can also avoid reducing the effects of
spraying operation when the residue of the pesticide is different from that of the next operation.
2
For further information about the product, please contact info@stockergarden.com.
1
2
3
49
Publicidad
Solución de problemas
