Beta 1834RR Instrucciones página 5

USE
• Connect the power supply cable to the mains socket, making sure that the mains voltage matches
the one stated in the Table TECHNICAL DATA.
• Turn on the lamp by pressing the ON/OFF switch on the rear panel.
• The first click will activate "SPOT" light on the end (torch-like lighting); the second click will activate
transverse LED light.
• The lamp is fitted with a hook and a magnetic base which can rotate up to 180 degrees.
MAINTENANCE
Maintenance and repair jobs must be carried out by trained personnel only. For such jobs, you can
contact Beta Utensili S.P.A.'s repair centre.
DISPOSAL
The crossed-out wheelie bin symbol on the equipment or packaging means that the product
should be collected separately from other types of urban waste at the end of its useful life.
Any user who is going to dispose of this tool can:
• deliver it to an appropriate collection facility for electronic and electrotechnical equipment;
• return it to the dealer upon purchase of a new, equivalent item of equipment;
• in case of a product for professional use only, contact the manufacturer which will arrange for the
product to be properly disposed of.
Proper disposal of this product allows the raw materials contained in it to be reused and prevents
damage to the environment and human health.
Illegal disposal of this product is a violation of the provision concerning the disposal of hazardous
waste and will give way to the application of such fines as provided for under current regulations.
This lamp is manufactured and tested in accordance with current EU regulations, and is covered by
a 12-month warranty for professional use or a 24-month warranty for nonprofessional use.
We will repair any breakdowns caused by material or manufacturing defects by fixing the defective
pieces or replacing them at our discretion.
Should assistance be required once or several times during the warranty period, the expiry date of
this warranty will remain unchanged.
This warranty will not cover defects due to wear, misuse or breakdowns caused by blows and/or
falls.
In addition, this warranty will no longer be valid if any changes are made, or if the lamp is forced or
sent to the customer service in pieces.
This warranty explicitly excludes any damage to people and/or things, whether direct or consequential.
DECLARATION OF CONFORMITY EU
We hereby declare, assuming responsibility, that the described product complies with the relevant
provisions of the following Directives:
• Low Voltage Directive (LVD) 2014/35/EU
• Electromagnetic Compatibility (EMC) Directive 2014/30/EU;
• Directive 2011/65/EU on the restriction of the use of certain hazardous Substances -
Ro.H.S. 2011/65/UE
The Technical Brochure is available at:
BETA UTENSILI S.P.A.
Via A. Volta 18,
20845 Sovico (MB)
ITALY
WARRANTY
5