Completing Installation - Dometic WAECO MagicTouch MT200 VW10 Manual Del Usuario

Installing and connecting the MT200
Skoda Octavia
Activation of the vehicle's indicators is conducted in the cable strand on the steering
column (fig. 5, page 3).
➤
Lay the black/white cable and the black/green cable of the radio remote control
along the original cable strand to the steering column.
➤
Connect the following cables of the radio remote control using piercing connec-
tors:
– Connect the black/white cable to the black/white cable (sw/ws) in the cable
strand on the steering column
– Connect the black/green cable to the black/green cable (sw/gn) in the cable
strand on the steering column
Skoda Fabia and VW Polo
Activation of the vehicle's indicators is conducted on the power distribution box un-
derneath the dashboard on the driver's side (fig. 2, page 2).
➤
Lay the black/white cable and the black/green cable of the radio remote control
along the original cable strand to the steering column.
➤
Connect the following cables of the radio remote control using piercing connec-
tors:
– Connect the black/white cable to the black/white cable (sw/ws) in the cable
strand on the steering column
– Connect the black/green cable to the black/green cable (sw/gn) in the cable
strand on the steering column
2.4

Completing installation

➤
Reattach the strap on the negative terminal of the vehicle battery again.
➤
Test the radio remote control to see if it works correctly.
➤
Fasten the control device in place using the fastening material supplied.
➤
Remount the panels and covers removed.
12
MagicTouch MT200 VW10