LU-VE Emeritus Manual Del Usuario página 33

WARNINGS
MANUFACTURERS DECLARATION OF INCORPORATION
STANDARDS - The products are provided for incorporation in machines as definedi n the EC Machine Directive 2006/42/EC and
subsequent modifications.
• PED 2014/68/EU
• Safety of Machinery EN 60204-1
• Directive 2014/30/EC and subsequent modifications. Electromagnetic compatibility.
• Low tension - Reference Directive 2014/35/EC
However it is forbidden to operate our equipment before the machine incorporating the products or making part thereof has been
declared to be in conformity with the EC Machine Directive
PRECAUTIONS: guard against any injury risks or damage to materials if these instructions are not followed.
A) For moving, installing and maintenance operations it is essential to comply as follows:
1 - Employ authorized personnel only for using moving equipment (cranes, forklift elevators, etc.).
2 - Wear work gloves.
3 - Never remain below suspended loads.
B) Before proceeding with electrical wiring it is essential to comply as follows:
1 - Employ only authorized personnel.
2 - Make sure the power line circuit is open.
3 - The main switch on the general power panel is open and padlocked in this position.
C) Before proceeding with the header/distributor connections it is essential to:
1 - Employ only authorized personnel
2 - Make sure the supply circuit is closed (no pressure).
3 -When performing welding operations, make sure the flame is not aimed towards the equipment (insert a shield if required). PAY
SPECIAL ATTENTION TO THE PROTECTION OF ADIABATIC PANELS, AS THEY ARE MADE OF EASILY FLAMMABLE PAPER MATERIAL.
D)DISPOSAL: LU-VE products are made of:
Plastic materials: polyethylene, ABS, rubber.
Ferrous materials: iron, stainless steel, copper, aluminium (possibly treated).
Cardboard materials: paper
Refrigerant liquids: follow the instructions of the system installer.
E) Remove the transparent protection film from painted metallic parts.
F) VDI 2047-2 guidelines "Hygiene for heat exchangers"
1