Data Transmission & Charging - Sunstech EB706 Manual Del Usuario

12. Data transmission & Charging
Connect the device to PC through the USB data cable
provided in the package.
Copy the music/image/document files in the computer's
hard drive, switch to the disk of reader and paste.
Charging
1. Use standard USB cable
Step One: Connect the device to PC through USB data
cable.
Step Two: After connecting properly with the computer,
Double click the icon "Safely Remove Hardware" on the right bottom of
the computer screen to remove equipment.
Do not unplug the device of the connection with the computer, then
charging starts.
2. Use charger
How charge the unit.
Please connect the USB cable to the external adaptor to battery charge.
After a few seconds appears the icon battery charge and after a few
seconds disappears.
To know how this the battery charge, please push the power key and
displayed the battery charge. The position of the switch ON/OFF don't
affect the battery charge.
When the battery is full,the battery icon show follow this picture .
Only use a external adaptor supplied by Sunstech. Any power adaptor that
does not meet with the technical characteristics can damage the unit.
Power supply：DC5.0 / 1500mA(DC)
15