DJI ZENMUSE XT S Guia De Inicio Rapido página 4

Disclaimer and Warning
Congratulations on purchasing your new DJI TM product. The information in this document
affects your safety and your legal rights and responsibilities. Please read this entire
document carefully to ensure proper configuration before use. Failure to read and follow
instructions and warnings in this document may result in serious injury to yourself or others,
or damage to your DJI product or damage to other objects in the vicinity, or violation of
the EU export control law. This document and all other collateral documents are subject to
change at the sole discretion of SZ DJI Technology Co., Ltd. (DJI). For up to date product
information, visit http://www.dji.com and click on the product page for this product.
Do Not Modify or Alter the Zenmuse XT S
The ZENMUSE TM XT S has been calibrated specifically for the designated camera and lens
before leaving the factory. No physical or mechanical modification or adjustment of the
gimbal is required or recommended. Do not add any other component or device (such as a
filter, lens hood, etc.) to the camera.
The Zenmuse XT S is a delicate instrument. Do not disassemble the gimbal or camera as
this will cause permanent damage.
Be sure to use a DJI approved battery, otherwise performance may be hindered and
internal malfunction or damage may occur.
Only Use Compatible Aircraft
The Zenmuse XT S is currently compatible with the following DJI Aircraft: MATRICE 200 V2
TM
series and Matrice 200 series. It will also be compatible with other designated products in due
course. To optimize the gimbal's performance, download the latest DJI Pilot app and update
the latest aircraft firmware, otherwise the Zenmuse XT S may not function properly.
IP44 Protection Rating
Under stable laboratory conditions, the Zenmuse XT S achieves an IP44 protection rating
by IEC60529 standards. However, this protection rating is not permanent and may reduce
over time after long-term use.
2