Publicidad
Idiomas disponibles
Idiomas disponibles
95. Install instrument panel left outer trim cover.
96. Install park brake release handle (3). Figure 31.
Tighten
Tighten to 9 N·m (80 lb in)
FIGURE 31
97. Install park brake release handle bolt (1).
Tighten
Tighten to 9 N·m (80 lb in)
Go to Step 102, for Hybrid (&HP2) vehicles.
98. Install the 2 screws that retain the accessory switches to the
instrument panel.
Tighten
Tighten the screws to 2 N•m (18 lb in)
99. Install accessory trim plate to instrument panel. See Figure 32.
FIGURE 32
Full Size Truck and SUV Navigation Radio Kit
ALL INFORMATION WITHIN
DATE
ABOVE BORDER TO BE PRINTED
EXACTLY AS SHOWN ON 8.5 x 11
WHITE 16 POUND NON-BOND
RECYCLABLE PAPER.
PRINT ON BOTH SIDES, EXCLUD-
ING TEMPLATES.
TO BE UNITIZED IN ACCOR-
DANCE WITH GMSPO SPECIFI-
CATIONS.
REVISION
AUTH
100.Connect the electrical connector to the center trim panel
switch.
101.Install instrument panel center trim panel. See Figure 33.
FIGURE 33
102.Position the upper trim panel to the top of the instrument
panel.
103.Install the ambient light sensor by twisting sensor back into
place from the underside of the trim panel.
104.Install upper trim panel to the top of the instrument panel.
See Figure 34.
FIGURE 34
PART NO.
REV25MR08
INSTALLATION INSTRUCTIONS
DR
TITLE
Full Size Truck and SUV Navigation Radio Kit
PART NO.
19153971
6200 Grand Pointe Dr., Grand Blanc, MI 48439
19153971
SHEET
9
SHEET
9
30
OF
30
OF
Publicidad
