Kohler K-1234 Guia De Instalacion página 4

Frame
Panel
2. Attach the Apron
Remove the panel from the frame, then set the panel aside.
Insert the bottom of the frame under the rim of the bath/whirlpool.
Center and push the frame up until it contacts the underside of the rim.
Thread one wing nut and one flat washer onto the carriage bolt.
Insert the carriage bolt assembly into the upper center hole in the back of the frame.
Loosely assemble the second flat washer and wing nut to the carriage bolt from the front of the
frame. Do not tighten at this time.
1011308-2-D
Rim
Frame
Push
Frame
Up
Wing
Nut
Flat
Washer
Frame
4
Rim
Carriage
Bolt
Support
Structure
Kohler Co.