Federal Signal Corporation 121 Hoja De Instrucciones página 6

dome lip with the four pins on the base. Push down on the dome and turn
clockwise until it locks in place (approximately 3/4-inch)
7. Replace the screw in the bottom of the dome.
8. Test the light for proper operation.
B. Cleaning Reflector.
Remove and replace dome in accordance with instructions in paragraph II.A. To
clean reflector, use a soft cloth and any liquid household cleaner. DO NOT USE abrasive
cleaners.
C. Lubrication.
The Motor-Gear Reducer Assembly is a sealed unit. Therefore, no lubrication is
required.
D. Replacement Parts.
Description
Dome, Clear
Dome, Blue
Dome, Amber
Dome, Red
Dome, Green
Dome, Magenta
Lamp, 12V
Lamp, 24V
Lamp, 120V, Krypton
E. Mounting Kits.
Description
Mounting Bracket, Wall
Mounting Bracket, Corner
Part Number
K8444357
K8444357-01
K8444357-02
K8444357-03
K8444357-04
K8444357-05
K8107223A
K8107236A
K8107251A
Model Number
LWMB2
LCMB2
-5-