Processing Table; Cleaning And Maintenance; Troubleshooting - Imetec F6101 Instrucciones Para El Uso

Food raw
meat
Quantity 300 g
Size
1*1 cm
Processing
12"
(in seconds)
Clean the appliance after having used it.
• Thoroughly wash the removable parts: the lid (1), splash-proof cover (2), the blades (3)
and the container (4) by hand with hot water and washing-up liquid or in the dishwasher
at a maximum temperature of 55°C.
• Dry well.
• Clean the motor casing (7) with a well-wrung damp cloth.
• Dry well.
Should one of the problems indicated occur, adopt the proposed solution:
Problem
The food is not chopped evenly
The parsley is not chopped properly
The meat is not chopped properly
The container rises while
processing the food

PROCESSING TABLE

parmesan parsley
cheese
180 g
1*1 cm
20"

CLEANING AND MAINTENANCE

TROUBLESHOOTING

Use the pulse mode and not continuous mode.
Wait for the blades to stop completely (3). Remove the motor casing (1)
and the splash-proof cover (2) and mix the ingredients with a spatula.
Close once again and continue processing in pulse mode.
The container (4) has been filled with too many ingredients; remove the
excess ingredients and continue processing.
Repeat the operation using dry parsley.
Chop the meat in 1 cm pieces and remove any cartilage. Do not exceed
the maximum quantity of 300 g.
Pieces of food may have set between the container (4) and the blades (5).
In this case, unplug the power cord (8) from the socket, remove the lid and
reposition the container (4) in its place. Close the container (4) with the lid
(1) and continue processing.
onions
carrots
celery
12 g 200 g
– 2*2 cm
10" in pulse
5"
mode
Solution
dried fruit chocolate
180 g 100 g
– 2*2 cm
5" in pulse 10" in pulse
mode mode
EN
11