Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTIONS FOR USE
DV6BTED4 (9HW), DV6BUTED4
(9HT), DV6C (9HC), DV6C (9HD),
DV6C (9HL),
DV6C (9HP), DV6C (9HR),
DV6CM (9HG), DV6D (9HP),
DV6DM (9HJ), DV6DTED (9HP),
DV6DTEDM (9HJ), DV6DU
M (9HH), DV6TED4 (9HV),
DV6TED4 (9HZ), DV6TED4
(9HY), DV6TED4 (9HW),
DV6TED4 (9HX), DV6TED4B
(9HV), DV6UTED4 (9HU),
DV6UC (9HM),
W16 D16 (9HZ), W16 D16U0
Special precautions - Read carefully
• Disconnect the battery earth leads (check the radio code, if available)
• Remove the spark or glow plugs to make the engine turn easier
• Do not use any cleaning fluids on belts, pinions or tensioners
• Always make a note of the route of the auxiliary drive belt before removal
• Turn the engine in the normal direction (clockwise, unless stated otherwise)
• Do not turn the camshaft, crankshaft or diesel injection pump once the timing chain has been removed (unless
specifically stated)
• Do not use the timing chain to lock the engine when slackening or tightening the crankshaft pulley bolts
• Do not turn the crankshaft or camshaft when the timing belt/chain has been removed
• Mark the direction of the chain before removing
• It is always recommended to turn the engine slowly, by hand, and to re-check the crankshaft and camshaft
timing positions
• Camshafts and crankshafts may only be turned with the chain/belt drive mechanism fully installed.
• Do not turn the crankshaft via camshaft or other gears
• Check the diesel injection pump timing after replacing the chain
• Observe all tightening torques
• Always refer to the manufacturer's service manual or the supplied instruction book
• Incorrect or out of phase engine timing results in damage to the valves
●
●
●
●
●
●
●
EN
●
11
Publicidad
Tabla de contenido
