Maintenance And Storage; Battery Maintenance - KNOVA KN 5025 Manual De Instrucciones

MAINTENANCE AND STORAGE

ATTENTION:
One-year periodic recalibration is necessary to
maintain accuracy.
Please contact your local dealer for calibrations.
2. Do not shake violently or drop wrench.
3. Do not use this wrench as a hammer.
4. Do not leave this wrench in any place
exposed to excessive heat, humidity,
or direct sunlight.
5. Do not use this apparatus in water.
(it is not waterproof).
6. If the wrench gets wet, wipe it with a dry
towel as soon as possible. The salt in
seawater can be especially damaging.
7. Do not use organic solvents, such as alcohol
or paint thinner when cleaning the wrench.
8. Keep this wrench away from magnets.
9. Do not expose this wrench to dust or sand
as this could cause serious damage.
10. Do not apply excessive force to the LCD
panel.
11. Apply torque slowly and grasp the center of
the handle. Do not apply load to the end of
the handle.
CAUTION:
1. Over-torquing (110% of
max. torque range) could
cause breakage or lose of
accuracy.

BATTERY MAINTENANCE

1. When the wrench is not going to be used for
an extended period of time, remove
the batteries.
2. Keep a spare battery on hand when going on
a long trip or to cold areas.
3. Do not mix battery types or combine used
batteries with new ones.
4. Sweat, oil and water can prevent a battery's
terminal from making electrical contact. To
avoid this, wipe both terminals before loading
a battery.
5. Dispose of batteries in a designated disposal
area. Do not throw batteries into a fire.