Before First Use; Preparing For Use; Using The Appliance - Uten KDF-558D Guía De Uso

- The surface below the appliance may become hot during use.
- Immediately unplug the appliance if you see dark smoke coming out of the
appliance. Wait until the smoke emission stops before you remove the frying
tray from the appliance.
Caution
- Place the appliance on a horizontal, level and stable surface.
- This appliance is intended for normal household use only. It is not intended
for use in environments such as staff kitchens, offices, farms or other work
environments. Nor is it intended to be used by clients in hotels or other similar
environments.
- If the appliance is used improperly or if it is not used according to the
instructions in the user manual, the warranty becomes invalid and seller
refuses any liability for any damage that may be caused.
Always unplug the appliance after use.
-
- Let the appliance cool down for approx. 30 minutes before you handle or clean
it.
- Remove burnt remnants.
1. Remove all packing material.
2. Remove any stickers or labels from the appliance – other than the rating label.
3. Thoroughly clean the basket and frying tray with hot water and some liquid
washing soap with a non-abrasive sponge.
Note: You can also clean these parts in the dishwasher.
4. Wipe the inside and outside of the appliance with a piece of moist cloth.
1. Place the appliance on a stable, horizontal and level surface that is also heat
resistant.
2. Place the basket in the frying tray properly.
Do not fill the frying tray with oil or any other liquid.
Do not put anything on top of the appliance. This disrupts the airflow and
affects the air-frying result.
1.Power on
Plug in, there is BEEPS sounds. Light up. LCD shows ' default status'. Press
to light up or light off.

Before first use

Preparing for use

Using the appliance

3