Anker PowerExpand Manual Del Usuario página 5

USB-A 3.1 Gen 1 and USB-A 2.0 Ports
Charge iWatch and other accessories using USB-A 3.1 Gen 1 port(BC1.2,
7.5W). Transfer data at 5 Gbps via the USB 3.1 Gen 1 port, or at 480 Mbps
via the two USB-A 2.0 ports. These ports can also be used to connect to
USB devices, including USB keyboards, mice, or storage devices.
Ethernet Port
Connect the dock to a router or modem at 10/100/1000 Mbps using an
Ethernet cable.
06
Audio Jack
Connect earphones or other devices with a 3.5 mm AUX connector.
Connect the Dock to One or Two Monitors
Connect the dock to up to two monitors via one HDMI port and one DP port.
With an HDMI port, you can connect to a monitor to stream video at
resolutions up to 4k@60Hz.
The following table lists the supported resolutions. The resolution may vary
depending on your monitor.
DisplayPort 1.4 Platform
Item HDMI
3840x2160@60Hz
Single Display
/
3840x2160@30Hz/
Dual display
2560x1440@60Hz
DisplayPort 1.2 Platform
Item HDMI
3840x2160@30Hz/
2560x1440@60Hz
Single Display
/
Dual display 1920x1080@60Hz
DP
/
3840x2160@60Hz
3840x2160@30Hz/
2560x1440@60Hz
DP
/
3840x2160@30Hz/
2560x1440@60Hz
1920x1080@60Hz
07