Publicidad
!
GB | Use
Mounting system for installing framed PV
modules with heigths between 30 and 50
mm on pitched roofs with the following
characteristics:
•
Roof pitch 5° - 60° (solar fasteners),
5°-60° (Roof hooks)
•
For roof pitches below 20° the permis-
sible roof pitch of the tile used applies
•
Single and double roman, plain tile,
natural slate, and flat tiles with
wooden substructures
•
PV-panel landscape and portrait
oriented
Static calculation must exist and be consid-
ered according to local regulations.
Installation guidelines
Ensure that the roof construction is suitable
for the introduction of forces at the fixing
points and their subsequent transmission.
In order to compensate thermal expansion,
included a break every 12 meters when
planning the PV-system.
For module positioning/fastening points
please refer to manufacturers recommen-
dations.
Please follow your local timber construction
standard.
Please do not use installed roof connections
as ladder.
If installation is located within 10km from
the coast, we advice not to use zinc coated
material.
For further information please contact your
sales representative or the technical depart-
ment at Renusol.
Installation notes
Please read these installation instructions
carefully before starting the installation
and familiarise yourself with the system
components.
During the installation and in particular
whilst working on the roof, ensure to work
according to the relevant health and safety
guidelines, safety guidelines and please
follow the current rules and regulations for
your corresponding region.
The individual installation instructions are
merely recommendations in accordance
with the current state of technology and
are based on previous experiences of how
Renusol systems can be installed. If any spe-
!
The structural stability of the PV-
system must be verified before
installation. The building must be
able to support the additional weight
safely.
2/36 | Renusol VS+ | 01/2020 REV-0.8
cial characteristics of the roof or object need
to be taken into account, we recommend
you to consult specialists such as roofers or
structural engineers where necessary.
Please check that the applied manual which
is up to date. All manuals are available in
the download area at
www.renusol.com
Testing/certification:
•
TÜV
•
MCS012 (IK0197)
Applicable Documents
"General installation, maintenance and as-
sembly instructions"
"Safety Instructions for Installation Instruc-
tions"
"Warranty and Disclaimer."
These documents are available at
www.renusol.com
Warranty:
The warranty only applies if an original and
complete Renusol system is used, with a
layout designed by Renusol.
Renusol is not accountable for the roofs ca-
pability to maintain the introduced forces.
Please check the roofs compatibility with a
static engineer.
Publicidad
