Configuration For The L88 - Marklin Digital L88 Manual De Instrucciones

Confi guration for the L88
The L88 must fi rst be confi gured before using it for the fi rst
time. To do this go into the CS to setup/Info and with the tool To do this go into the CS to setup/Info and with the tool
symbol go into the confi guration mode. All of the following
images are examples:
Open up Info
Select Link S88 #17.
18
Now the individual data can be set..
• Evaluation of Bus 0 (direct bus for the L88),
Setting for individual units = 16 indicator contacts
Setting for matrix = up to 64 button controllers
• Length of Bus 1-3
Here you enter how many S88 units are connected to
each bus (max. 31).
• Cycle period for Bus 1-3
Enter query cycles for the S88 busses in milliseconds (ms)
(min 10 ms - max. 1000 msm, factory setting 100 ms).
• Bit time for the S88
Set the cycle for the answer (factory setting 167 µs)
• Cycle period for (Link 88) Contacts 1 - 16
Query cycles for the Link contacts when used as track
contacts 1 - 16.
• Cycle period for keyboard
Query cycle when used as a keyboard (factory setting 67 ms).
• Columns for the keyboard
Entering the columns (max. 8) for the keyboard matrix
• Rows for the keyboard
Entering the rows (max. 8) for the keyboard matrix