Before First Use - Unpacking And Removal Of Transit Screw; Power Supply - Dentsply Sirona ProMix 2 Manual De Instrucciones

3 Before first use – unpacking and removal of transit screw
The capsule mixer has been carefully packed to withstand any damage during transit.
Ensure all parts contained within the box match the product contents list above. Care
should be exercised in unpacking the capsule mixer to prevent scratching or other dam-
age.
Before using remove transit screw from underside of unit.
For safety during transit, the capsule mixer has been fitted with a transit
screw prior to shipping. It is essential to remove this screw prior to using
the capsule mixer.
1. Place the capsule mixer on its side on a soft surface.
2. Using the supplied 3 mm Allen
loosened. Remove screw.
3. Place the capsule mixer correct side up on a flat surface in an easily accessible
location.
4 Power supply
1. Connect the power cord to the capsule mixer then connect it to an earthed mains
power supply. If necessary, turn the power supply on.
2. Position the capsule mixer so that the switch on the socket outlet can be readily
accessed or the plug can be easily removed.
3. Turn the back switch of the ProMix™2 to ON.
key, turn the transit screw anti-clockwise until it is
®
4