Introduction; Intended Use; Features; Package Contents - FLORABEST FAAS 12 B2 Manual De Instrucciones

CORDLESS BRANCH SAW
FAAS 12 B2

Introduction

Congratulations on the purchase of your new appli-
ance. You have selected a high-quality product. The
operating instructions are part of this product. They
contain important information on safety, usage and
disposal. Before using the product, please familiar-
ise yourself with all operating and safety instruc-
tions. Use the product only as described and for the
specified areas of application. Please also pass on
these operating instructions to any future owner.

Intended use

This appliance – standard designation: reciprocat-
ing saw – is intended for the sawing of wood,
plastics and building materials up to a fixed stop
(base plate). The appliance is suitable for rough
sawing work, straight and curved cuts; it cuts sur-
faces off flush. With the grip bracket mounted, the
appliance is suitable for sawing branches. Follow
the information concerning saw blades and prac-
tical advice on sawing. Any other uses of or modi-
fication to the appliance is deemed to be improper
and carries the risk of serious personal injury. The
manufacturer accepts no responsibility for dam-
age(s) attributable to misuse. The appliance is not
intended for commercial use.

Features

Safety lock-out
Handle
Battery pack
Release (battery pack)
ON/OFF switch
Saw blade (SWISS MADE)
Base plate
Quick-release chuck
Hand guard
Release (grip bracket)
Grip bracket
High-speed battery charger
Control LED (green)
Control LED (red)
Battery charge level display
■ 14 │ GB │ IE

Package contents

1 cordless branch saw FAAS 12 B2
1 high-speed battery charger FAAS 12 B2-2
1 battery pack FAAS 12 B2-1
1 grip bracket
1 saw blade for wood 152 mm / TPI 6
(SWISS MADE)
1 carrying case
1 set of operating instructions

Technical data

Cordless branch saw:
Rated voltage:
Rated idle speed:
Stroke length:
Max. cutting performance: Wood 80 mm
Battery pack:
Type:
Rated voltage:
Capacity:
High-speed
battery charger:
INPUT:
Rated current:
Rated power consumption: 38 W
OUTPUT:
Rated voltage:
Rated current:
Charging time:
Fuse (internal):
Protection class:
Noise emission values:
Measured values for noise determined in accordance
with EN ISO 4871. The A-rated noise level of the
power tool at the working location is typically as
follows:
Sound pressure level:
Uncertainty:
Sound power level:
Uncertainty:
Wear hearing protection!
FAAS 12 B2
(DC)
12 V
n 0–2700 rpm
0
20 mm
FAAS 12 B2-1
LITHIUM ION
(DC)
12 V
2000 mAh
FAAS 12 B2-2
230–240 V ~ , 50 Hz
(alternating current)
(DC)
12.6 V
2400 mA
approx. 60 min.
T2A
2 A
II / (double insulation)
L = 82 dB(A)
pA
K = 3 dB
pA
L = 93 dB(A)
WA
K = 3 dB
WA
FAAS 12 B2