Power Supply - Seca 959 Manual De Instrucciones Y Garantía

Power supply

The scale is powered by a mains unit and by rechargeable batteries.
Connecting the rechargeable battery pack:
– Open the battery compartment in the
base of the display housing.
– Connect the plug contacts to the re-
chargeable battery pack.
– Close the lid of the battery compart-
ment again.
The LC display and the evaluation electronics have a low power consumption – 1,000
weighing operations can be performed with a fully charged battery.
Once battery voltage is no longer adequate, the battery symbol
the display to indicate that battery power is dropping.
If the batteries are not charged, battery voltage will ultimately not be adequate for error-
free measuring. In this case,
possible.
The rechargeable batteries are charged by
the mains unit supplied. For this purpose,
the mains unit needs to be connected to
the mains for at least 24 hours.
Please use only the mains unit sup-
plied or mains units from the seca
range of accessories. Before plugging
the unit into the socket, check whether
the mains voltage marked on the
mains unit matches local mains volt-
age.
Model 958/959
bAtt
appears in the display and weighing is no longer
first appears in
23