Gate House RC536 Manual Del Usuario página 2

ASSEMBLY INSTRUCTIONS
1
1. Use Crossbeam to assemble H sections.
Note: All parts except (Z) will be from other kits.
Attach crossbeam (Z) to post units with 1/4 x 3" bolt (AA) and 1/4 nut (BB)
Twist handle (PP) onto pin. Height of crossbeam is adjustable by 1" increments.
Hardware comes from kits R100, R242, R342, R442
PP
Handle x 2
AA
1/4 x 3" Bolt x 2
1/4 Nut x 2
BB
For full assembly and installation instructions, see the manual included with the
R100 Bottom Run or visit www.lowes.com/ramps.
2