Switching Between Anynet + Devices - Samsung 5 Serie Manual Del Usuario

Switching between Anynet + Devices

¦
1. Press the TOOLS button. Press the ENTERE button to select Anynet + (HDMI-CEC).
2. Press the ▲ or ▼ button to select Device List, then press the ENTERE button.
Anynet + devices connected to the TV are listed.
N
If you cannot find a device you want, press the red button to scan for devices.
N
. Press the ▲ or ▼ button to select a particular device and press the ENTERE button. It is
switched to the selected device.
Only when you set Anynet + (HDMI-CEC) to On in the Application menu, the Device
N
List menu appears.
Switching to the selected devices may take up to 2 minutes. You cannot cancel the
N
operation during the switching operation.
The time required to scan for devices is determined by the number of connected devices.
N
When the device scan is complete, the number of devices found are not displayed.
N
Although the TV automatically searches the device list when the TV is turned on via the power button, devices connected to
N
the TV when the TV is on or under some conditions are not automatically displayed in the device list. Press the red button to
search for the connected device.
If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet + function. Make sure to
N
switch to an Anynet + device by using the Device List.
Anynet + Menu
The Anynet + menu changes depending on the type and status of the Anynet + devices connected to the TV.
Anynet + Menu
View TV
Device List
(device_name) Menu
(device_name) Operation
Record: (*recorder)
Stop Recording: (*recorder)
Receiver
If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is
N
connected, it will be represented as (*device_name).
TV Remote Control Buttons Available in Anynet + Mode
Device Type
Anynet + Device
Device with built-in
Tuner
Audio Device
The Anynet + function only works when the active source on the TV remote control is set to TV.
N
The ∏ button works only while in the recordable state.
N
You cannot control Anynet + devices using the buttons on the TV. You can control Anynet + devices only using the TV remote
N
control.
The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet + device.
N
The Anynet + functions do not operate with other manufacturers' products.
N
The π, µ operations may differ depending on the device.
N
Description
Anynet + mode changes to TV broadcast mode.
Shows the Anynet + device list.
Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of the
DVD recorder will appear.
Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the play
menu of the DVD recorder will appear.
Starts recording immediately using the recorder. (This is only available for devices that support
the recording function.)
Stops recording.
Sound is played through the receiver.
Operating Status
After switching to the device, when the menu
of the corresponding device is displayed on the
screen.
After switching to the device, while playing a file
After switching to the device, when you are
watching a TV program
When Receiver is activated
English - 2
View TV
Device List
Record
DVDR Menu
DVDR Operation
Setup
Available Buttons
Numeric buttons ▲/▼/◄/►/ENTEREbuttons
Color buttons / ExIT button
π (Backward search) / µ (Forward search) /
∫ (Stop) / ∂ (Play) / ∑ (Pause)
z button
y / MUTE button
: DVDR
Move Enter Return
U E R