Safety Instructions - Perel Tools EFANT75 Manual De Usuario

1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the EFANT75! Please read the manual thoroughly before bringing this device into service. If the
device was damaged in transit, don't install or use it and contact your dealer.

2. Safety Instructions

Keep this device away from rain and moisture.
Unplug the mains lead before cleaning or disassembling.
• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer
will not accept responsibility for any ensuing defects or problems.
• Make sure that the available voltage does not exceed the voltage stated in the specifications of this manual.
• Do not crimp the power cord and protect it against damage. Have an authorized dealer replace it if necessary.
• Disconnect the device from the mains to clean it or when it is not in use. Handle the power cord by the plug only.
• Do not operate the fan with a damaged power cord or plug or when the fan is not functioning properly.
• Do not cover the power cord like running it under carpets. Run the power cord away from traffic or where people
can trip over it.
• Never cover the fan to prevent fire. Place the fan onto a hard surface.
• Keep the EFANT75 away from naked flame sources and sparks.
• Only connect the device to the mains after having assembled the fan.
• Never insert fingers or any other object through the grille when the fan is running.
• To prevent overload and fuses from blowing, make sure not to connect any other appliance into the same mains
outlet where the fan is connected to.
• We do not the use of an extension cord as this may overheat and cause fire. However, if the use of an extension
cord is absolutely necessary, use a 14 AWG size cord which is rated at 1875W minimum. Connect this fan only to
the cord.
• Always fully insert the plug into the mains. Periodically check the plug for wear and deformations.
• Note that damage caused by user modifications to the device is not covered by the warranty.
• Keep the device away from children and unauthorized users.
• CLEAN THE FAN BEFORE FIRST USE AND REMOVE ALL PIECES OF POLYSTYRENE OR OTHER
PACKAGING MATERIAL USING A VACUUM CLEANER.
EFANT75
EFANT75 – TOWER FAN (29" / 75cm)
3 PEREL