Publicidad
Idiomas disponibles
Idiomas disponibles
The airflow charged with negative ions elimi-
nates damaging substances and dust from the
hair surface, restoring shine and lustre.
The hair hydrated in this way and subjected to
less stress, reduces the creation of split ends
making the hair shiny and soft.
Speed (H) (D)
To set (increase or decrease) the speed, repea-
tedly press the speed key (H) until the desired
speed is reached. Each pressing corresponds
to an increment in the speed and once the
maximum speed has been reached, the selec-
tor goes back to the minimum speed.
The activation of the appliance is also signal-
led by the turning on of the speed indicating
light (D) and the symbol (N4) appears on the
display (N) in rotation and the symbol (N7)
appears which indicates the speed set:
I .......speed 1
II ......speed 2
III .....speed 3
IIII.....speed 4
Temperature (L) (E)
To set (increase or decrease) the temperature,
repeatedly press the temperature key (L) until
the desired temperature is reached.
pressing corresponds to an increment in the
temperature and once the maximum tempera-
ture has been reached, the selector goes back
to the minimum temperature.
the cold airflow function is selected, then it
must be excluded (by pressing F) in order for
the hot air function to work.
The activation of the hot airflow is signalled
with the turning on of the light (E) and the
symbols (N1) and (N5) appear on the display
(N).
IIII.....temperature 4
III .....temperature 3
II ......temperature 2
I .......temperature 1
The display (N) also shows the temperature of
the outgoing air expressed in centigrade
(N6).
Concentrator (T)
The removable air concentrator directs the air-
flow to a specific point. It is recommended for
drying or styling specific areas especially with
a brush or rollers. For assembling, position it
on the hairdryer and press down lightly until it
locks into place. Pull gently to remove.
Diffuser (U)
The diffuser prevents the concentration of hot
air, thus preventing the hair from burning.
For assembling, position it on the hairdryer
and press down lightly until it locks into place.
Pull gently to remove.
CLE NING
With the plug disconnected from the power
outlet, clean the appliance with a soft cloth.
NEVER immerse the appliance in water or
other liquids.
DO NOT use solvents, abrasive substances or
detergents.
Periodically clean the air inlet filter (O) located
on the back of the appliance and the suction
area it protects.
Open the filter by pulling gently on the upper
part, so that it opens and tips over. fter clea-
Each
ning, reclose the filter.
NEVER operate the appliance with the air fil-
ter open!
TTENTION: if
10
Publicidad
