Cleaning Accessories; Inlet Air Filters Maintenance; Exhaust Air Filter Maintenance; Replacing The Filter - Collection Bag - bluematic CUBE Manual De Uso

Accessories in a good condition guarantee improved suction and cleaning of the
floor, as well as a longer vacuum motor life. To clean the accessories, proceed
as follows:
1. Take the machine to the maintenance area.
2. Take all necessary steps to ensure that the device is in a safe condition (see
"MACHINE SAFETY ").
3. Remove all the accessories from the vacuum hose and clean them with a
Carefully cleaning the intake air filter prolongs the life of the appliance. To clean the
filter, proceed as follows:
1. Take all necessary steps to ensure that the device is in a safe condition (see
"MACHINE SAFETY'").
2. To open the aspirator pull the lever (2) in the direction indicated by the
arrow(Fig.12).
3. Using the handle (3), in the vacuum tank lid (Fig.13), remove the vacuum tank
lid from the collection tank (rotating it and shifting it as indicated in the figure).
Put the vacuum tank lid gently on the floor.
4. Remove the inlet air filter (2) from the inside of the collection drum and the fabric
Carefully cleaning the exhaust air filter prolongs the life of the appliance. To
clean the filter, proceed as follows:
1. Take all necessary steps to ensure that the device is in a safe condition (see
"MACHINE SAFETY").
2. Remove the outgoing air filter (1) from the appliance (Fig.20).
3. Clean the filter with a jet of air from a distance of at least 20 cm. Replace
it if damaged.
To replace the filter - collection bag, proceed as follows:
1. Take all necessary steps to ensure that the device is in a safe condition (see
"MACHINE SAFETY").
2. To open the aspirator pull the lever (2) in the direction indicated by the
arrow(Fig.12).
3. Using the handle (3) (Fig.13) remove the upper part of the vacuum cleaner;
(Tilting it as in (Fig.13). Lay the upper part of the aspirator gently on the floor
4. Insert the paper collection bag filter inside the collection drum, making sure
To replace the appliance's power cord, proceed as follows:
1. Take all necessary steps to ensure that the device is in a safe condition
(see "MACHINE SAFETY").
2. Extract the quick connector of the cable (1) in the power socket (2) on the
upper part of the vacuum cleaner.
3. Unlock the power cable (1) inside the cable holder(3) (Fig. 16)
4. Remove the damaged cable.
To dispose of the appliance, take it to a demolition centre or an authorised
collection centre.
Before scrapping the machine, it is necessary to remove and separate out
the following materials, then send them to the appropriate collection centres
in accordance with the environmental hygiene regulations currently in force:
• Felt
• Electric and electronic parts*
• Plastic parts
• Metallic parts
(*) In particular, contact your local distributor when scrapping electric and
electronic parts.

CLEANING ACCESSORIES

4. Remove the vacuum hose (1) from the vacuum nozzle (2) on the collection
5. Repeat the operations in reverse order to reassemble all the parts.

INLET AIR FILTERS MAINTENANCE

5. Clean the filter with a jet of air from a distance of at least 20 cm. Replace
6. Repeat the operations in reverse order to reassemble all the parts.

EXHAUST AIR FILTER MAINTENANCE

4. Repeat the operations in reverse order to reassemble all the parts.
REPLACING THE FILTER – COLLECTION BAG
5. Using the handle (3), place the upper part of the vacuum cleaner on the
6. Close the suction device by pressing the closing lever (2) (Fig.15)
SUPPLY CABLE REPLACEMENT
5. Lock the power cable (1) inside the cable stop(3) (Fig. 16)
6. Insert the quick connector of the cable (1) into the power socket (2) on the

DISPOSAL

24
damp cloth.
tank, before pulling the vacuum hose press the button (3) for unlocking the
catch (Fig.3). Clean it with a damp cloth.
filter bag (1) from the container (Fig. 19).
it if damaged.
ATTENTION: Users are advised to always wear protective gloves, to
avoid the risk of serious injury to hands.
ATTENTION: The place this operation is carried out should comply with
current environmental protection regulations.
ATTENTION: Users are advised to always wear protective gloves, to
avoid the risk of serious injury to hands.
ATTENTION: The place this operation is carried out should comply with
current environmental protection regulations.
to insert the filter correctly in its housing (4), inside the collection drum and
not to damage the cardboard support (6) present in the bag (5) (Fig.14)..
collection barrel. Paying great attention to insert the two forks (7) on the
appropriate seat (8) present in the suction shaft(Fig.13)
upper part of the vacuum cleaner.
ATTENZIONE: Si consiglia di indossare sempre dei guanti protettivi per
evitare lesioni gravi alle mani.