Toto TBV02405 Manual Del Usuario página 29

Warning
Mandatory
When cleaning the filter, be sure to do so after closing the
stopcock of the piping.
Also, check that part of the hot water side filter is not hot.
Hot water at a high temperature may come out, which
may cause scalding and damage to your property
by wetting household goods due to water leakage.
4. Remove the plate, loosen the screws and remove the resin plate.
* When removing the plate, using suction disks (2) will make it easier
to remove.
5. Loosen the filter with a socket wrench (17 mm) then extract it.
* Check that part of the hot water side filter is not hot.
6. Remove any garbage and dirt stuck in the filter with a toothbrush or the like.
7. Attach the filter and open the stopcock.
8. After fixing check that hot water at the appropriate temperature
(approximately 40°C) comes out.
For models with a bath spout
Model TBP02001
1. Loosen the screws (4) and remove the spout cap.
Avoid losing the screws.
2. Remove any garbage and dirt stuck in the filter and straightening plate
with a toothbrush or the like.
3. Attach the filter, straightening plate and the spout cap.
28
Open
Hot water side filter part