Maintenance; Vacuum Packaging Machine Care - Intertek JUNIOR Manual De Uso Y Mantenimiento

JUNIOR
EN

MAINTENANCE

5. MAINTENANCE
Unplug the machine before cleaning it or carrying out any maintenance work!
For any repairs, if possible contact an authorized Technical Assistance Centre.
Only use original spare parts.
5.1

VACUUM PACKAGING MACHINE CARE

The quality of the vacuum and sealing depends on proper cleaning of your VACUUM PACKAGING MACHINE.
Make sure to periodically clean the machine using a damp cloth.
Whenever sealing bags, ALWAYS firstly check the sealing bar (A), and if it is not clean use a damp cloth for cleaning.
The surface of the sealing bar is delicate and can be damaged if cleaned with different materials from those indicated.
WARNING! Do not start cleaning when the bar is hot: DANGER OF BURNS.
To disinfect the inlet nozzle proceed as follows:
• Connect the appliance to current socket.
• Power the packaging machine by pressing button (1) ON-OFF until all signal lights on the buttons briefly switch-on.
• Lift the appliance mobile door (B).
• Press the PUMP button leaving the pump to function for a few minutes.
• Press button (1) ON-OFF to terminate the cycle.
Operating and service manual / Mode d'emploi et d'entretien
Manual de uso y mantenimiento / Ed. 01 - 2011
•
A
24
VACUUM PACKING MACHINE
CONDITIONNEUSE SOUS VIDE
MAQUINA DE VACÍO
B
•
REV. 00 - Cod.: 1500387