English
Content
English INGUN, errors and technical changes reserved
1)
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2)
Device description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3)
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4)
Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
5)
Start up operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
6)
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
7)
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
8)
Technical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
9)
Putting out of operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
1)
Introduction
1.1)
Target group
These operating instructions contain important information on operating and servicing the receiv-
er. It is intended for persons who install, commission, and maintain the receiver.
The instructions do not describe which receiver should be used for each pending job. For this, the
INGUN Pylon-Receiver product information is available.
1.2)
Manufacturer and service address
INGUN Prüfmittelbau GmbH
Max-Stromeyer-Strasse 162
78467 Konstanz
Germany
Phone: +49 7531 8105-0
Fax. +49 7531 8105-65
info@ingun.com
www.ingun.com
1.3)
Warranty
Our General Terms and Conditions (GTC) apply, and can be downloaded from the website at
www.ingun.com/GTC INGUN.
Warranty and liability claims for personal and property damage are excluded if they are due to one
or more of the following causes:
incorrect installation or start-up operation of the receiver
operation of the receiver with defective safety devices or improperly installed or not functioning
safety and protective devices
unauthorised structural changes to the receiver
non-compliance with maintenance intervals or improperly executed maintenance
improper repair
use of spare parts that do not meet the conditions laid down by the manufacturer
disasters, actions of third parties or force majeure
improper use of the receiver
1.4)
Copyright
This manual is copyrighted. The manual may not be completely or partially copied, distributed,
translated, or used in any unauthorised way for competitive purposes or passed on to others. Any
such use is permitted only with explicit authorisation of INGUN.
©
INGUN, errors and technical changes reserved
10