Opening And Closing The Camera; Inserting The Batteries/Connecting Power Supply - Kompernaß WK 8 B3 Instrucciones De Uso

Opening and closing the camera

The control buttons, connections and the battery compartment are
inside the camera.
♦ Undo both of the side locking clamps 8 to open the camera.
♦ To close the camera, hook the metal bars of the locking clamps
into the brackets and then press the plastic latch downwards.
There is a locking eyelet 3 between the two locking clamps with
which you can securely close the camera with the help of a padlock.

Inserting the batteries/connecting power supply

♦ To insert batteries X in the device, open the camera.
♦ Pull the clip on the top of the battery compartment lid slightly
inwards. At the same time, pull on the upper black textile strap
and lift off the battery cover.
♦ Insert 4 or 8 x 1.5 V AA/Mignon/LR6 batteries into the battery
compartment 7. While doing so, please note the stated polarity
and ensure that the batteries are placed on the black textile tape
as shown in the figure. The textile tape makes removing the bat-
teries easier.
■ 16 │ GB │ IE
AA
AA
MENU SHOT
PLAY OK
AA
AV USB OFF-TEST-ON
TF
WK 8 B3