ShelterLogic 70615 Manual De Usuario página 8

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

7. AncHoR THe FRAme
A. Use the provided steel driving rod and a sledge hammer to drive each EasyHook™ anchor into the ground.
Leave approximately 8 inches of cable exposed above the surface.
B. Remove the driving rod and insert it through the loop of the cable. Pull up on the cable to set the anchor.
C. Wrap the cable around each corner leg above the cover rail and clamp closed.
A
B
To avoid serious damage or injury,
noTe:
frame MUST be properly anchored!
Page 8
c
05_70615_0B

Publicidad

Tabla de contenido
loading

Tabla de contenido