Basic Operations; Location Of Controls - Muse M-1229 DAB Manual De Instrucciones

Caution!
- Make sure to connect the color coded leads according to the diagram. Incorrect connections
may cause the unit to malfunction or damage the vehicle's electrical system.
- Make sure to connect the speaker (-) leads to the speaker (-) terminal. Never connect the left
and right channel speaker cables each other or to the vehicle body.
- Make sure all the connections are completely correct before turning on your unit.
Do not connect the ignition wire (red) and the battery wire (yellow), it may cause a short
circuit, even result in fire.
INSTALLATION
The unit is installed to be an anti-theft one. The chassis of the unit wears a sliding metal housing.
Please do the connection of the power. Speakers and antenna are according to the requirement
of the instruction book. Then install the sliding metal housing in the car as follows:

LOCATION OF CONTROLS

GB - 3
1. MUTE button (To mute or restore sound)
2. POW button (To turn on/ off the unit)
3. (eject button)
4. VOL / SEL enter knob
5. / BAND button
6. DISC slot
7. LCD display
8. MICRO SD slot
9. RESET button
10. CLK/TRANS button (To set clock time, Transfer the call between mobile phone and the unit)
11. / MODE button ( End call / To select function mode)
12. button
13. button
14. AMS / button (Automatic storing; Search a track)
/ 1 button (To select preset channel 1 in radio mode. To start or pause playback.)
15.
16. INT / 2 button (To select preset channel 2 in radio mode. To start/ cancel intro playback.)
17. RPT / 3 button (To select preset channel 3 in radio mode. To repeat playback.)
18. RDM / 4 button (To select preset channel 4 in radio mode. To start/ cancel random playback)
19. -10 / 5 button (To select preset channel 5 in radio mode. To select 10 track backward.)
20. +10 / 6 button (To select preset channel 6 in radio mode. To select 10 track forward.)
21. AUX IN jack
22 USB port
23. MIC

BASIC OPERATIONS

Turn on/off the unit
Press POW button to turn on the unit. Press this button again to turn off the unit.
Selecting the mode
When the unit is on, press MODE button repeatedly to select different source mode: FM
DAB DISC USB MICRO SD
Note: DISC, USB and SD mode can not be selected if no such source was plugged in the unit.
Adjust time:
1. When the unit is on, press and hold CLK button to enter into setting mode. The hour digits
will flash.
2. Rotate volume knob anti-clockwise and clockwise to adjust the hour value. Press this button
again to confirm the hour value.
3. The minute digits will flash, rotate volume knob anti-clockwise and clockwise to adjust the
minute value. Press CLK button to confirm.
Noted: It will confirm your setting if no key is pressed within 5 seconds.
Time display
Press CLK button to display the current time when unit is ON.
NOTE: It will return to normal play mode if no key is pressed within 5 second.
Reset the unit
Operating the unit for the first time or after replacing the car battery, you must reset the unit.
To set the unit to initial status, press RESET button on front with a pointed object. When some
errors occur in display, you can also reset the unit, but it will erase the clock setting and some
memorized functions.
AUX BT
GB - 4