Getting Started - Zonair3D Pure Airbox Manual De Usuario

Welcome
Thank you for choosing Zonair3D
Airbox. Please take a few minutes to read this manual before starting to use your
Zonair3D equipment in order to familiarise yourself with its operation.
TM

Getting started

GENERAL SAFETY INSTRUCTIONS
Pure Airbox is a portable air purification equipment with tested filtration efficiency.
It has three filtering stages: F7 pre filter, H14 absolute Hepa filter and the unique
GRSystem by Zonair3D
components. It is therefore important that you carefully read the following safety
instructions before use.
·
This equipment should not be used by people with reduced physical or mental
abilities without assistance or supervision.
·
It is not a toy. Children should not use this equipment unless supervised by
an adult.
·
Do not block the Pure Airbox air intake nor the air outlet from the Pure Airbox.
·
Do not spill water or other liquids on the equipment.
·
Do not switch on the equipment if any of the electrical components is damaged
or not operating correctly.
·
If the power cord is damaged or broken, it can be replaced by a male/female
power cord such as those used for computers or similar equipment.
·
Remember to switch off the equipment before unplugging it from the power
socket.
·
Do not operate inside the unit, unless for filter replacement (refer to Maintenance
instructions). Any other operation must be carried out by personnel authorised by
Eurofred | Zonair3D
·
Before disassembling any panel, check that the unit is not switched to the electric
power network.
·
Only use filters supplied by Eurofred | Zonair3D
Positioning
·
Position the equipment in a large, ventilated space.
·
Do not position the equipment on a soft surface.
Always position the equipment on a flat, stable surface.
·
Do not position the equipment close to explosives.
and congratulations on your purchase of Pure
TM
for gas removal. This equipment includes electrical
TM
.
TM
.
TM
19 Pure Airbox