VMK88
MANUAL
PRESETS
plus
PROCEDURE: PRESET SELECTION
The VMK-88
has 27 programmable user presets. Let's look into the two ways of selecting a
plus
preset.
1) ROTATE DATA ENTRY DIAL
Rotating the DE Dial will scroll thru
the Presets.
The cursor will blink.
Scroll to the Preset you want.
2)PRESS ENTER
NOTE: You can preview the Presets
without making a selection . If you
don't Press the Enter Button.
the VMK88 will return to the last
Preset Selected.
Wait until the cursor stops
blinking. Preset is now selected
PRESS PAGE Up/Dn.
You may also choose Presets
sequentially by using the Page
up or Page down Buttons.
NOTE:(1) You must allow the VMK88
to scan the controls before the selection
is complete; (2) You can only move thru
the Presets one at a time.
PROCEDURE: PRESET NAMING
The VMK-88
has 27 programmable user presets. Each Preset can have a 10 character name.
plus
Each name can have any combination of letters or numbers you choose. In this example, we will
start from a preset that's already been programmed. You have the option of naming your preset
during the editing process. When you've completed your edits and reach the press storage step
(Step 6 in Button Programming, Step 7 in Sliders/Knobs/Pedals, Step 8 in Keyboard), follow this
procedure:
7