Operating Information - ResMed ResLink Manual Del Usuario

A
CCESSORIES
®
The NONIN
Model 8000AA Adult Finger Clip (not pictured here), available from ResMed, are
compatible for use with the R
Note: The same oximeter cable can be used for both sensors.
sensor cable (Model
8000J Adult Flex
Sensor)
oximeter cable
(Model 3012 Pulse
Oximeter)
O
PERATING
When connected to a flow generator, the R
collects and stores Summary and Detailed data, and
•
facilitates upgrade of the flow generator software.
•
D C
ATA OLLECTION
There are two types of data:
Summary Data
•
Detailed Data.
•
A brief explanation of these data types is described in "Summary and Detailed Data"
on page 7. Refer to the A
about Summary and Detailed Data.
Note: When you use a SmartMedia card in combination with a flow generator that it has
not been used on before, the ResLink deletes all information currently stored on the
SmartMedia card.
To save patient data, download all information on the SmartMedia card before sending
•
the card to a new patient.
If you are using the same flow generator for multiple patients, make sure that you have
•
erased all data before you give the flow generator and ResLink to the next patient.
To collect data from the flow generator, insert the SmartMedia card into the R
Collection and storage of data occurs automatically during therapy.
After therapy, the patient can return the card to the clinician using the Mailback card
provided with the R
service, use a padded envelope. You can download data stored on the SmartMedia
card for review and analysis.
Model 3012 Pulse Oximeter and Model 8000J Adult Flex Sensor, or
L
ES INK
I
NFORMATION
™ and R
S
UTO CAN
. If returning the SmartMedia card through the postal
L
ES INK
.
:
L
ES INK
™ manuals for detailed information
S
ES CAN
O
PERATING
oximeter sensor
Xpod connector
L .
ES INK
I
NFORMATION
5