MeisterCraft Auto POLISH MPM 110 B Manual Del Usuario página 34

5950000-Poliermasch-man
• Remove adjusting tools or spanners
before switching on the appliance.
Tools or spanners left in rotating parts
of the appliance may cause injury.
• Do not overestimate yourself. Make
sure you are on a safe footing and
always keep your balance. That way
you can better control the appliance
in unexpected situations.
• Wear suitable clothing. Do not wear
loose-fitting clothing or jewellery.
Keep hair, clothing and gloves away
from moving parts. Loose clothing,
jewellery or long hair can get caught
in moving parts.
• If dust extracting and catching
equipment is fitted, make sure that
it is connected up and correctly
used. Use of this equipment reduces
dust hazards.
Careful handling and use of power
tools
• Do not overload the appliance. Use
for your work the power tool
intended for it. Using the correct
power tool will enable you to work
better and more safely in the
specified power range.
• Never use a power tool which has a
defective switch. A power tool which
cannot be switched on and off is
dangerous and must be repaired.
• Unplug the appliance from the
mains before adjusting it, changing
attachments or putting it aside. This
precaution ensures that the appliance
will not be started accidentally.
• Keep power tools out of the reach
of children, when they are not in
34
use. Do not permit persons to use
08.05.2006 8:38 Uhr Seite 34
the appliance, if they are not
familiar with it or have not read
these instructions. Power tools are
dangerous, if used by inexperienced
persons.
• Look after the appliance properly.
Check that moving parts are
operating properly and are not
sticking and that no parts are
broken or so badly damaged as to
prevent the appliance from
operating properly. Have damaged
parts repaired before using the
appliance. Many accidents are caused
by badly maintained power tools.
• Keep cutting tools sharp and clean.
Carefully maintained cutting tools
with sharp cutting edges jam less
frequently and are easier to control.
• Use power tools, accessories,
attachments, etc., in accordance
with these instructions and the
specifications for an appliance of
this particular type. Also take into
consideration the working conditions
and the work to be done. The use of
power tools for any application other
than those for which it is intended
may result in dangerous situations.
Service
• Have your appliance repaired only
by qualified specialists and only with
original spare parts. This way it is
ensured that the appliance remains
safe to use.
6 – Safety instructions
relating specifically to
the equipment
• Pull out power plug before changing
polishing pad