LawnMaster GT1454 Manual Del Operador página 15

MAINTENANCE
Your grass trimmer has been designed to operate over a long period of time with minimum
maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning.
WARNING
Before performing any maintenance, switch off and unplug the tool.
Regularly clean the ventilation slot in your grass trimmer using a soft
brush or dry cloth.
Regularly clean the cutting line and spool using a soft brush or dry cloth.
Regularly remove grass and dirt from the underside of the guard using a
blunt scraper.
FITTING A NEW SPOOL
1. Unplug the grass trimmer.
2. Remove the empty spool (Fig. 15).
3. Press the tabs ① and remove the spool cover ② from the cutting head ③. Remove the empty
spool ④ from the cutting head.
4. Replace with a new spool (Fig. 16).
5. Release both cutting lines from the parking slot and guide the lines into both eyelets ⑤.
The lines should protrude approximately 4" from the eyelets ⑤.
6. Put the new spool ④ into the cutting head ③. Rotate the spool slightly until it is seated.
7. Snap the spool cover ② on the cutting head ③ and ensure it is in place (Fig. 17).
①
⑤
③
Fig. 15
②
①
④
⑤
③
Fig. 16
②
④
15
② ②
③
Fig. 17