EN
Storage
Only transport and store the hedge trimmer with
its protective cover F [11] mounted on the cutting
blade.
Thoroughly clean your device at the end of each
Î
season.
Always store the device in a dry and safe location
Î
that is inaccessible to children.
Keep the hedge trimmer and especially its plastic
Î
components away from brake fluids, petrol,
mineral oil containing products, penetrating oils
etc. They contain chemical substances that can
damage, attack or destroy the plastic components
of the hedge trimmer.
Risk of injuries or material damage.
¾ In case of doubt always take your mower to a specialist workshop.
¾ Switch the device off before any inspection or before working on the blades.
Problem
Possible cause
Motor does not run No mains supply
Cable damage:
Attention! Electric shock due to cable damage A
fuse/circuit breaker will not always blow/trip if the
cable is cut through or damaged.
Do not touch the cable before the mains plug
has been pulled out of the socket.
The cutting blade
The cutting blade is blunt.
becomes hot.
There is a lot of friction because of a lack of
lubrication.
Uneven running,
The cutting blade is damaged.
severe vibration of
The cutting blade fastening has come loose.
the hedge trimmer.
Warranty
The warranty conditions of our local company or
importer apply in all countries. Under the terms of
the warranty we will repair faults on your device
free of charge, insofar as material or manufactur-
ing defects are the cause. To make a claim under
warranty please contact your seller or your nearest
branch.
CE Declaration of Conformity
Further details about the device are con-
tained on the separately enclosed CE
Declaration of Conformity, which forms part
of this instruction manual.
24
Fertilizers and other garden chemicals contain
Î
substances that may have a highly corrosive
effect on the metal parts of the hedge trimmer.
Therefore do not store your hedge trimmer in the
vicinity of these substances.
Troubleshooting
WARNING!
Environmentally-friendly disposal
Electrical tools, accessories and packaging must
be fed into an environmentally compatible recycling
chain.
Remedy
Check the power supply and if necessary
contact an electrician to arrange repair.
Arrange for complete replacement of the
damage cable by a workshop. Repair
of the cable using insulating tape is
forbidden.
Consult a specialist workshop.
Oil the cutting blade.
Consult a specialist workshop.
Consult a specialist workshop.
Power tools:
Do not throw your power tool away with
domestic waste! Take it to a disposal
facility.
Troubleshooting