oneConcept Lausanne Manual De Instrucciones página 11

Power Connection
• Connect the AC cord to the AC socket and to the wall socket. The set is now ready to use.
• To turn on the set, turn the volume knob clockwise.
• To turn off the set, turn the volume knob anticlockwise till a "click" is heard.
• To switch off the set completely, pull the AC cord from the wall socke
Radio Operation
• Adjust the antenna. Switch the mode selection knob to FM or AM.
• Rotate the volume knob clockwise to turn radio on and adjust to desired sound level. The
radio status LED indicates proper reception.
Aux In
Connect external players (mobile phones, laptops, MP3 players, etc.) here, using the Line-Out
of the external device and a 3.5mm audio cable. Switch to BT and turn the volume up.
Headphones
Connect headphones to the device (3.5mm). When headphones are connected, the internal
speaker will be muted.
BT
Switch the mode selector to BT
•
• Activate BT on your external device and search for available BT devices. Pair with „LAU-
SANNE".
• When you are prompted to enter a password, please type in „0000".
• During search, the BT LED flashes. On successful pairing, the LED stops flashing.
Operation
11