Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
English
Your CARDI electric chainsaw is a power tool designed to perform straight cuts into
concrete, reinforced concrete, stone, using the proper diamond chain and bar. The
product needs sufficient clean water to operate and cool bar and chain through the water
inlet system. Powerful and lightweight, this product is designed to perform finishing jobs
by professional cutters and any kind of contractors. Follow general contractor, local and
national regulations how to dispose of slurry generated during operating the saw.
Operator needs to be properly trained.
Do not use this product to cut wood, plastic or other materials not listed above.
Do not use bars and chains different from the ones defined in this user manual.
In the following text, figures are identified by numbers,
details inside figures by letters. Figures are depicted on the
first pages of this user manual.
G
e
n
e
r
a
G
e
n
e
r
a
1)
WARNING! Read all instructions. Failure to follow all
instructions listed below may result in electric shock, fire
and/or serious injury. The term "power tool" in all of the
warnings listed below refers to your mains operated (corded)
power tool or battery operated (cordless) power tool.
SAVE THESE INSTRUCTIONS
1) Work area
a)
Keep working area clean and well lit. Cluttered
and dark areas invite accidents.
b)
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
c)
Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
2) Electrical safety
d)
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
e)
Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
f)
Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
g)
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
h)
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
3) Personal safety
i)
Stay alert, watch what you are doing and use
common sense when operating a power tool.
l
s
a
f
e
t
y
r
u
l
e
s
l
s
a
f
e
t
y
r
u
l
e
s
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or
medication.
A
operating power tools may result in serious
personal injury.
j)
Use safety gear: always wear eye protection.
Safety equipment such as dust mask, non-skid
safety
shoes,
gloves,
protection used for appropriate conditions will
reduce personal injuries.
k)
Avoid accidental starting. Ensure the switch is
in the off position before plugging in. Carrying
power tools with your finger on the switch or
plugging in power tools that have the switch on
invites accidents.
l)
Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
m)
Do not overreach. Keep proper footing and
balance at all times. This enables better control of
the power tool in unexpected situations.
n)
Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellery
and long hair can be caught in moving parts.
o)
If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
these devices can reduce dust related hazards.
p)
Use auxiliary handles supplied with the tool.
Loss of control can cause personal injury.
4) Power tool use and care
q)
Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
r)
Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must
be repaired.
s)
Disconnect the plug from the power source
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
t)
Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
8
moment
of
inattention
hard hat,
or
hearing
while
Publicidad
Tabla de contenido
