Component List; Drying Tips - Weston 68-0201-W Manual De Instrucciones

Vent Holes
Power
Cord

COMPONENT LIST

DIAGRAM NUMBER
1
If any components of this unit are broken, the unit does not operate properly or you
Or call Weston Brands, LLC Toll Free at
Monday thru Friday 8:00am-5:00pm ET. Outside the U.S. call 001-216-901-6801

DRYING TIPS

. Make sure the footwear or gloves are free of excess dirt. For heavy soiled
footwear or gloves, brush or wash off the excess dirt before placing them on
the Boot & Shoe Dryer.
. To allow the air to circulate properly, loosen the laces and tongue of the
footwear so there is space around the Footwear Extension, allowing the air to
escape and circulate.
. Make sure the toe of the footwear is positioned higher than the heel. Failure
to do this may result in the toe not drying completely.
. Do not allow the top of the footwear to rest on the Base. Allow a 4"- 6" (10.2
- 15.2 cm) gap between the top of the footwear and the Base of the Boot &
Shoe Dryer. Failure to do this will not allow the hot air to escape and will
result in poor drying.
4
R
PART DESCRIPTION
FOOTWEAR EXTENSION (2)
need a replacement instruction manual, visit us on the web at
WestonSupply.com
Drying Posts
1-800-814-4895
1
Footwear
Extensions
PART NUMBER
68-0204