Würth 1952 003 625 Traducción Del Manual De Instrucciones De Servicio Original página 8

DE
GB
INTRODUCTION
FR
Please read this manual before carrying out any operation.
It is compulsory to read this instruction manual before starting any
NL
kind of action.
The proper operation and full compliance of this product's
ES
performance is guaranteed only if all the instructions provided in this
manual are closely adhered to.
IT
We guarantee that this product complies with the technical
specifications described in this manual.
The manufacturer shall not be held responsible for any improper
PT
uses other than those described herein.
Use protective work gloves, protective footwear, hard hat and safety
PL
goggles.
DA
Misuse:
- This product should only be used as described in this
EL
documentation; any other use is considered improper.
- The manufacturer accepts no responsibility for any
damage caused by the incorrect or unreasonable use of
the equipment.
- Moreover, misuse shall also void the warranty.
Take care of your tools:
- Be sure to store your tools in a clean state.
- Place the tools inside their original package.
The Spring Stopper tool set for shock absorber removers consists
of a steel body that supports a plastic insert, which bears on the
spring's spiral to lock its movement during the compression and
release stages, combined with the thrust of the plasticized sheet.
The advantages of WÜRTH's tool set during disassembly are
simplicity, rapidity and safety. Its adaptability to a wide range
of springs, and the special materials used, avoid scoring and
damaging both the spring and the bracket, while maintaining high
grip.
8
METHOD OF PREPARATION
1
2