Descargar Imprimir esta página

Courtyard Creations XTM011Z Instrucciones De Montaje página 2

Publicidad

Idiomas disponibles

Idiomas disponibles

FIGURE 2
Step 2:
Place the seat assembly (#4) onto a non-abrasive
surface, such as a carpet, with its underside facing
upwards. Place the leg assembly on top of the seat
assembly (#4). See Figure 2.
FULL ASSEMBLY
Warranty
• This product is covered by Courtyard Creations Inc.'s 3 year limited warranty.
• Proof of purchase (dated register receipt) is required for warranty claims.
• It remains the customer's responsibility for freight and packing charges to and from the service center.
STOP!
Missing A Part?
No Need To Go Back To
The Store
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
Call Toll Free:
TEL: 1-877-539-7436
FAX: 1-877-539-7439
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
For further assistance,
please visit us at
service.cci@polywares.com
V-3
2
1
4
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
STOP DO NOT RETURN TO STORE!
FIGURE 3
Step 3:
Fasten the leg assembly to the seat assembly (#4) by
using bolts (#6).
been tightened completely.
Step 4:
Turn the ottoman to its upright position.
See Full Assembly.
Cleaning and Maintenance
• Wash frame and fabric parts with mild soap and water,
rinse thoroughly, and dry completely. Do not use
bleach, acid, or other solvents on the frame or fabric
parts.
• We recommend the use of furniture covers to protect
your ottoman when not in use.
• Inspect and tighten all bolts and fasteners on a regular
basis to ensure the proper performance and safety of
your ottoman.
• In order to prolong the life and beauty of your ottoman,
we recommend that it be stored in a dry and protected
area during off season periods.
SEPARATE AND IDENTIFY ALL OF THE PARTS, MAKING SURE THAT
YOU HAVE ALL OF THE PARTS LISTED.
IF YOU DO NOT LOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTS THAT MAY HAVE BECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY
PARTS ARE MISSING OR DAMAGED, CALL THE HELP LINE AT
1-877-539-7436 BEFORE RETURNING THIS ITEM TO THE STORE.
PROVIDE THE FOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THE PRODUCT.
2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS
LIST.
MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS
PRODUCT TO THE RETAILER.
PAGE 2 OF 2
6
2
4
35
#6 BOLT M6*35
Make sure that all of the bolts have
See Figure 3.
1

Publicidad

loading